it looks like for some reasons the brodvoice did not like my old style config. I changed that exacly to what they have on their web and it is ok. I also changed the codec to g726 and I am impressed with the quality. Anyone who uses asterisk should try that. Quality is very good.
Bart > I already tried to switch proxies, but it did not help. > But I never tried to change signaling. > I will check this out later today. > > thx > >> Bart, >> >> We have has similar issues with BroadVoice in the past. From what I >> understand they had problems with DTMF depending on which proxy you >> register >> to. This is a bug that related to their session border controllers which >> should have been resolved. >> >> Looking at your config your first each account registers to a different >> BV >> POP (the IP address is of the first is different to the second account). >> >> Suggest the following course of action. >> >> 1. Try pinging each of the following BroadVoice POPs to find which is >> closest to you. >> proxy.nyc.broadvoice.com >> proxy.dca.broadvoice.com >> proxy.bos.broadvoice.com >> proxy.chi.broadvoice.com >> proxy.lax.broadvoice.com >> proxy.mia.broadvoice.com >> >> 2. Change your /etc/hosts file to so that the IP of the nearest POP from >> the >> list above is mapped to hostname sip.broadvoice.com >> >> NOTE: They did have problems with their LAX POP for DTMF. >> >> 3. Change your config file so all host entries point to >> sip.broadvoice.com >> instead of the 147.135.X.X IP address you're using at present! It make >> easier to make a single change to the /etc/hosts file for testing in >> future. >> >> 4. Change your DTMF mode from inband to rfc2833. BroadVoice does support >> out-of-band DTMF signalling, though their website is out of date. >> >> i.e. dtmfmode=rfc2833 >> >> 5. You may want to check that your second "register =>" statement is on >> a >> new line in your config file! ;-) >> >> We have out-of-band DTMF working properly across 6 separate BV accounts >> and >> register to their proxy.nyc.broadvoice.com POP without problems. >> >> As an FYI, BroadVoice also seem to unofficially support G729, iLBX and >> G726 >> codecs. If bandwidth is a problem I suggest trying out G726. We've been >> using G726 instead of G711u for the past week and have been impressed >> with >> the results >> >> Regards >> >> Neil/ >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Bartosz >> Wegrzyn - asterisk >> Sent: Tuesday, December 20, 2005 8:31 PM >> To: [email protected] >> Subject: [Asterisk-Users] dtmf problem >> >> >> hi everyone, >> >> I do have 2 lines with broadvoice. >>>From 2 days on one line my dtmf tones are not passed to asterisk server. >> It siply goes through the extensions routine acting link it did not >> receive >> any tone. Could it be problem with my config??? >> >> It looks like this:(it worked for last 1.5 year) >> num2 is ok, but num1 is not working. >> >> Any ideas before I call support which is always a problem. >> >> [general] >> externip=lexon.ws >> bindaddr = 192.168.1.251 >> port=5060 >> localnet=192.168.1.0/255.255.255.0 >> disallow=all >> allow=ulaw >> register => number1:[EMAIL PROTECTED] register => >> number2:[EMAIL PROTECTED]/2000 >> tos=0x18 >> srvlookup=yes >> nat=never >> insecure=yes >> >> [sip.broadvoice.com] >> type=peer >> username=num1 >> fromuser=num1 >> authuser=num1 >> secret=pass1 >> host=sip.broadvoice.com >> context=sip >> fromdomain=sip.broadvoice.com >> canreinvite=no >> nat=never >> dtmfmode=inband >> >> >> [sip.broadvoice.com.home] >> type=peer >> username=num2 >> fromuser=num2 >> authuser=num3 >> secret=pass2 >> host=sip.broadvoice.com >> context=sip >> fromdomain=sip.broadvoice.com >> canreinvite=no >> nat=never >> dtmfmode=inband >> >> [broadvoice-incoming] >> type=peer >> host=147.135.8.128 >> context=from-broadvoice >> qualify=yes >> canreinvite=no >> disallow=all >> allow=ulaw >> nat=never >> >> [broadvoice-incoming2] >> type=peer >> host=147.135.0.128 >> context=from-broadvoice >> qualify=yes >> canreinvite=no >> disallow=all >> allow=ulaw >> nat=never >> >> [broadvoice-incoming3] >> type=peer >> host=147.135.4.128 >> context=from-broadvoice >> qualify=yes >> canreinvite=no >> disallow=all >> allow=ulaw >> nat=never >> >> thx >> >> Bart Wegrzyn >> >> >> >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
