have you checked the order the modules are loaded and that this matches the zaptel.conf ?
[EMAIL PROTECTED] wrote on 22.12.2005 09:48:55: > Hi everybody, > I have a problem with my *.. > I have an Octobri Card working good.. > and 2 x100p clones .. > the fact is that * modeprobes ok and load drivers ok. > but when I want to make a call outside, I get this error > > -- Executing Dial("SIP/203-7f0a", "Zap/g1/69XXXXX65|30") in new stack > Dec 19 12:33:51 NOTICE[3042]: app_dial.c:759 dial_exec: Unable to create channel of type 'Zap' > > the group 1 are 8 lines of the Octobri > the group 2 are 2 x100p clones > > zapata.conf file--------------------------------------------------------- > [EMAIL PROTECTED] asterisk]# vi zapata.conf > > ; > ; Default context > ; > context=enlace > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > echotraining=800 > relaxdtmf=yes > rxgain=4.0 > txgain=4.0 > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel=25-26 > group=2 > switchtype = euroisdn > > signalling = bri_cpe > ; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode) > ;signalling = bri_net_ptmp > ; p2p NT mode (for connecting an ISDN pbx in point-to-point mode) > ;signalling = bri_net > > pridialplan = local > prilocaldialplan = local > nationalprefix = > internationalprefix = 0 > > echocancel = yes > > context=incoming > group = 1 > ; S/T port 1 > channel => 1-2 > > group = 1 > ; S/T port 2 > channel => 4-5 > > so on to latest Octobri port > > > group = 1 > ; S/T port 8 > channel => 22-23 > > > ---------------end of zapata.conf file > > > ----------------zaptel.conf file--------------------- > [EMAIL PROTECTED] etc]# vi zaptel.conf > loadzone=es > defaultzone=es > # qozap span definitions > # most of the values should be bogus because we are not really zaptel > > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > span=5,1,3,ccs,ami > span=6,0,3,ccs,ami > span=7,0,3,ccs,ami > span=8,0,3,ccs,ami > > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > bchan=13,14 > dchan=15 > bchan=16,17 > dchan=18 > bchan=19,20 > dchan=21 > bchan=22,23 > dchan=24 > fxsks=25-26 > --------------end of zaptel.conf file --------------------- > someone could help me????? > thanks in advance > Bye_______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users