Sorry to re-post this... I sent the last one from a mobile T-Mobile account and their IP was evidently picked up as spam. My apologies for the "spam message" that was sent to the list earlier!
>>>> Can someone help me understand how to identify frame slips from >>>> "pri debug", "pri intense debug", or any other method? >>>> I am familiar with zttest, avoiding interrupt sharing, mucking with >>>> ACPI, making sure DMA is on, etc... I have a list of changes I >>>> intend to make to the server(s), but don't know how to actually >>>> watch the output to see if my changes are affecting the # of frame >>>> slips. >>> >>> First things first; >>> Check your timing param in zaptel.conf, you almost certainly want it >>> set to 1 if you are connecting that span to a phone company and it >>> is the only such connection on that board. >> >> The timing is already set to 1 for each of the cards. > > Ah, worth asking. Also, just in case, have you powercycled those boxes > since you set the timing source ? Yes. These boxes were all set "correctly" during their original install, and have been power cycled several times since then. > I had no end of trouble 'till I noticed that a cold-start seemed to be > the only thing that ensured that both ends of the link _knew_ that I'd > changed the timing settings. > > I've mentioned this on-list a while back and got mixed reactions, some > folk felt cold start is overkill and a mod/load/unload is enough, but > everyone agrees that an asterisk reload isn't enough. > > The only other thing I can advise is that you look at running the > patch that Matt (Fredrikson?) from Digium put out a month or so back, > it allows the low level HDLC protocol to run on the chip, not in the kernel. > I haven't looked at it as I don't think it is supported on the older cards. I am aware of this patch (5313), but it appears to only work for TE4XX/TE2XX cards. Since the two cards I am using are T100P and TE110P I don't think it is currently an option. Eric _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
