I have had a similar problem with a BT circuit, it turns out my circiut is not PRI, but DAS, which is some sort of BT enhanced (or modified) PRI, I believe the signalling is a bit different. My PRI premise gear has occasional lockups with it.
note this is not an asterisk setup, but a LCR providers piece of hardware. You may just want to ensure thaqt your PRI is really PRI. James Richards, IT Manager Europe Electronic Theatre Controls -----Original Message----- From: Alastair Maw [mailto:[EMAIL PROTECTED] Sent: 13 October 2003 10:18 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] e100p in norway? On 13/10/03 10:03, Roy Sigurd Karlsbakk wrote: > see below's conversation. it seems the e100p card doesn't work with BT. > Any idea how this'll work against Telenor (norway)? > > roy > > <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in > .no? > <cypromis> dunno about no > <cypromis> I cannot use it in UK > <cypromis> cause the framer has problems with system-x switches at bt I'm using an E400P in the UK with a System-X switch (provider is YourCommunications). I was previously using one with Colt (unknown switch). IIRC, getting it working required a fairly new build of libpri/*/zaptel. -- Alastair Maw MX Telecom www.mxtelecom.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users