According to the posting on the -cvs list, there was a small change to the wctdm2400 driver (or whatever the correct name is). Therefore you should be able to download the zaptel source, compile, and install.
This assumes you're running a fairly recent version of asterisk, which you probably are if you already have that driver. If I recall recorrectly, the change was a one line item. You could probably find that change, edit the one line and recompile. ------------------------ > Can someone describe a simple means of doing this upgrade? > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Malcolm > Davenport > Sent: Friday, December 23, 2005 11:24 AM > To: [email protected] > Subject: [Asterisk-Users] TDM2400P driver change > > Hello, > > Thank you for your support of Digium and Asterisk. > > Yesterday, we identified a problem with the driver for the TDM2400P card > when used with FXO port modules. The X400M was producing (and > expecting) the audio signal at an abnormally high level, which negatively > impacted the performance of the echo cancelers, both hardware and software. > It also resulted in unusual audio artifacts when the actual signal was > already at a high level. > > The driver in our Subversion repositories of Zaptel (both 'trunk' and > 'branches/1.2') has been modified to properly initialize the FXO ports to > alleviate this problem. We encourage all owners of TDM2400P cards with FXO > ports to update their driver as soon as possible, especially if they are > experiencing audio quality and/or echo issues on the FXO ports. This > updated driver will be part of the Zaptel 1.2.2 release as well, if you wish > to wait for a tarball release. > > Thank you again for supporting Digium and Asterisk! > > -- > Malcolm Davenport > Digium > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > ---------------End of Original Message----------------- _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
