Kerry: I hope this helps.
I had EXACTLY the same symptom when I was trying to get an X100P clone to work yesterday. Bumping the toneduration parameter in zapata.conf to 200 milliseconds cured the problem.
Roger Kerry Garrison wrote:
Asterisk 1.2.1 Updated the TDM2400 driver over the weekend Incoming calls seem to work perfectly Outbound calls never connect. If you listen in on the call to a 7 digit local number, you hear the first 6 digits, then a small delay, then the last digit. Then there is a long pause before the line is picked up, then a very long pause before the telco fires back "you call could not be completed at this time". Calling using an analog phone on that line works fine. Do I possibly have some DTMF issues or something like that? Any suggestions would be appreciated. This is my only installation with the TDM2400 so I am kind of at a loss. Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - [EMAIL PROTECTED] http://www.techdatapros.com _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- ######################################################## Roger Hill 07739 707 180 Perseverance is the hard work you do after you get tired of doing the hard work you already did. ######################################################## _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
