Hi all, I am installing an Asterisk box equipped with the Sangoma A102 card. The telco just tested the PRI interface and it is ll ok. I now connect my Asterisk box and I can't get the D-Channel up. If I enable intense pri debug I see messages like the following:
--SNIP START-- < [ 02 01 7f ] < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] < 0 bytes of data -- Got SABME from network peer. Sending Unnumbered Acknowledgement >> [ 02 01 73 ] >> Unnumbered frame: >> SAPI: 00 C/R: 1 EA: 0 >> TEI: 000 EA: 1 >> M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] >> 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter == Primary D-Channel on span 1 up pbx*CLI> < [ 02 01 7f ] < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] < 0 bytes of data -- Got SABME from network peer. Sending Unnumbered Acknowledgement >> [ 02 01 73 ] >> Unnumbered frame: >> SAPI: 00 C/R: 1 EA: 0 >> TEI: 000 EA: 1 >> M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] >> 0 bytes of data -- Restarting T203 counter -- Restarting T203 counter == Primary D-Channel on span 1 up T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (0) >> [ 00 01 01 01 ] >> Supervisory frame: >> SAPI: 00 C/R: 0 EA: 0 >> TEI: 000 EA: 1 >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] >> N(R): 000 P/F: 1 >> 0 bytes of data -- Restarting T203 counter -- Retrying poll with f-bit Sending Receiver Ready (0) >> [ 00 01 01 01 ] >> Supervisory frame: >> SAPI: 00 C/R: 0 EA: 0 >> TEI: 000 EA: 1 >> Zero: 0 S: 0 01: 1 [ RR (receive ready) ] >> N(R): 000 P/F: 1 >> 0 bytes of data -- Restarting T203 counter Stopping T_203 timer T_200 timer already going (3) >> Protocol Discriminator: Q.931 (8) len=13 >> Call Ref: len= 2 (reference 0/0x0) (Originator) >> Message type: RESTART (70) >> [18 03 a9 83 86] >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 >> ChanSel: Reserved >> Ext: 1 Coding: 0 Number Specified Channel Type: 3 >> Ext: 1 Channel: 6 ] >> [79 01 80] >> Restart Indentifier (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated Channel (0) ] -- T200 counter expired, What to do... -- Retransmitting 17 bytes >> [ 00 01 00 01 08 02 00 00 46 18 03 a9 83 86 79 01 80 ] >> Informational frame: >> SAPI: 00 C/R: 0 EA: 0 >> TEI: 000 EA: 1 >> N(S): 000 0: 0 >> N(R): 000 P: 1 >> 13 bytes of data -- Rescheduling retransmission (2) -- T200 counter expired, What to do... -- Timeout occured, restarting PRI Sending Set Asynchronous Balanced Mode Extended >> [ 00 01 7f ] >> Unnumbered frame: >> SAPI: 00 C/R: 0 EA: 0 >> TEI: 000 EA: 1 >> M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] >> 0 bytes of data == Primary D-Channel on span 1 down --SNIP END-- Config is the following: zaptel.conf: span=1,1,2,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf [channels] language=fr context=from-pstn switchtype=national resetinterval=never signalling=pri_cpe faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=1-23 Any hints appreciated Andre _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
