Hello, The idea is the following:
For the 1.2.1 installation just set the parameter disconnect => *97 In your features.conf For the 1.0.7 installation you either upgrade or patch the code. The "patch the code" would require you a lot of knowledge of c programming. It would consist of extracting from the 1.2.1 code the "disconnect" functionality and add it to the 1.0.7 code base. But that is not straight forward... If you need it badly we can do it for you as consulting. But I strongly advise you to upgrade. Upgrade,now, is not an easy task either, but it might be easier that the code patch. Mainly because you would have to migrate the configuration or test it... Do you have a test bed? BR Bogdan Moldovan MODULO Consulting "The Future Is Not What It Used To Be" http://www.modulo.ro -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Obelix Sent: Tuesday, January 03, 2006 2:01 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] How to set features.conf to change thehangup key. Quoting Bogdan Moldovan <[EMAIL PROTECTED]>: I don't have this in my main installation, which is 1.0.7. In the case of 1.0.7 where else can I effect that change? I also have a 1.2.1 setup, what would I have to change in the code below? What is the general idea? > Indeed, this is 1.2.1 > > But do the following: > > Go to the source tree, do a > vi res/res_features.c > > Search for a : > struct ast_call_feature builtin_features[] > > And you should see the builtin features: > > In 1.2.1 I have: > > #define FEATURES_COUNT (sizeof(builtin_features) / > sizeof(builtin_features[0])) > struct ast_call_feature builtin_features[] = { > { AST_FEATURE_REDIRECT, "Blind Transfer", "blindxfer", "#", > "#", builtin_blindtransfer, AST_FEATURE_FLAG_NEEDSDTMF }, > { AST_FEATURE_REDIRECT, "Attended Transfer", "atxfer", "", "", > builtin_atxfer, AST_FEATURE_FLAG_NEEDSDTMF }, > { AST_FEATURE_AUTOMON, "One Touch Monitor", "automon", "", "", > builtin_automonitor, AST_FEATURE_FLAG_NEEDSDTMF }, > { AST_FEATURE_DISCONNECT, "Disconnect Call", "disconnect", > "*", "*", builtin_disconnect, AST_FEATURE_FLAG_NEEDSDTMF }, }; > > In case you do not have this, good changes are that, in case you need > badly this feature, you will upgrade or tweak the sources... > > Bogdan > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
