The magic setting is callprogress=yes, however, we have this working properly in the lab but not at this particular client location right now. Strange, but true. -Kerry
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Sunday, January 01, 2006 10:27 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] Having major issues with TDM2400 > > > > On Sun, 1 Jan 2006, Kerry Garrison wrote: > > > The goal is to create a user that has a SIP device and a custom ZAP > > channel device, have them both ring until one is answered, > basically a ring group. > > But I am using AMP's users and device mode rather than the > extensions mode. > > I have this working properly on my office system. However, with the > > TDM2400 I cannot have both the zap channel and sip channel > ringing at > > the same time and only handing the call to the end device > that answers > > the call. I don't understand why this is so difficult for > everyone to > > grasp. Send a call to both a custom ZAP device and a sip phone and > > whoever answers it gets the call. > > -Kerry > > By default, analogue zap trunks do not have call progress detection. > > Therefore, as soon as the number has been dialled out on the > trunk, Asterisk regards the line as being answered. > > Then, the dial command says: "aha, zap/g0/... is answered. > Stop ringing the other lines". > > If you are in a supported country (ie basically north > america), callprogress=yes in zapata.conf may help. > > But essentially what you are trying to do is not supported on > analogue trunks. > > Steve > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users