have you tried to parse the traffic what phone is requesting from your tftp-server ? maybe you get a hint where
[EMAIL PROTECTED] wrote on 05.01.2006 03:21:07: > I am working on adding three older Cisco phones to *, two 12SPs and one 30VIP. One of the 12SPs > (griffin) and the 30VIP (scott) is booting correctly and I have dial tone. The other 12sp starts > up, then I get a message on the display stating Requesting Load ID, then it reboots. I am not > sure why this is occurring. The phone does was working on a CCM installation not long ago. Below > is the skinny.conf file. Anyone seen this issue? > ; > ; Skinny Configuration for Asterisk > ; > [general] > port = 2000 ; Port to bind to, default tcp/2000 > bindaddr = 192.168.1.51 ; Address to bind to > dateFormat = M-D-Y ; M,D,Y in any order (5 chars max) > keepAlive = 120 > allow = all > ; disallow = > > ; Typical config for 12SP+ > [griffin] > device=SEP0010EB002A64 > model=12SP > version=P00203010100 > context=from-internal > line => 1234 > [emma] > device=SEP00306409C932 > model=12SP > version=P00203010100 > context=from-internal > line => 1500 > [scott] > device=SEP0010EB0013DF > model=30VIP > version=P00203010100 > context=from-internal > line => 2000 _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users