Hi, I think you didn't install the libpri. On Thu, 2006-01-05 at 22:48 +0100, Arnar Gestsson wrote: > Hi guys, > > I've been installing and configuring a TE110p card. The compile and > install went very well. I'm using this on FC4 and I compile with > linux26 as well checked I on the udev configs. > > zttool and ztcfg both indicate that the card is ready. > > But when I try to "load chan_zap.so" then I get the following > > > Unable to load module chan_zap.so > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown > signalling method 'pri_cpe' > Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must > be specified before any channels are. > Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: > chan_zap.so: load_module failed, returning -1 > > My config is here below. > > TIA > > Arnar Gestsson > > > /etc/zaptel.conf > > span=1,1,0,ccs,hdb3,crc4 > > loadzone = nl > loadzone=de > defaultzone=nl > > bchan=1-5,7-15,17-31 > dchan=16 > > /etc/asterisk/zapata.conf > > [trunkgroups] > trunkgroup => 1,16 > spanmap => 1,1 > > [channels] > language=en > context=default > switchtype=euroisdn > pridialplan=unknown > signalling=pri_cpe > ;rxwink=300 > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=5.0 > txgain=1.0 > echotraining=yes > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > channel => 1-15,17-31 > > > -- Domjan Attila <[EMAIL PROTECTED]>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
