Is your problem related to the settings under iax.conf? I have commented
out the whole of [iaxtel2] and left in [iaxtel].
I have a problem with my setup in that I have got it to register by
putting the register command in the iax.conf, but when I call my own
number I just get silence. Output on console is:
-- Executing Dial("SIP/phone1-b4ee",
"IAX/farnwomt:[EMAIL PROTECTED]/[EMAIL PROTECTED]") in new stack
-- Calling using options
'exten=17008451426;callerid=192.168.254.160;language=en;context=iaxtel;username=farnwomt;formats=2;capability=65283;version=1;adsicpe=2'
-- Called farnwomt:[EMAIL PROTECTED]/[EMAIL PROTECTED]
-- Call accepted by 12.37.165.130 (format GSM)
-- Format for call is GSM
Any guesses why this happens?
Thanks,
Michael
On Tue, 14 Oct 2003, Ariel Batista wrote:
> Ok folks I have another question. So far I have gotten my IAXTEL number
> and I have been able to make calls from my asterisk system to any IAXTEL
> number and even to FWD numbers. I also got FWD to work and I now can get
> calls to my main system. It's great when these things work. But when I
> call my own IAXTEL number 17005441100 all I get is a message saying the
> user is un registered or un available. I set the register =>
> loginName:[EMAIL PROTECTED] in the iax.conf. So how do I configure
> the extensions.conf to send the call to my extension! Here is where I
> am lost!
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
