In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] says... > Figured it out :) > > Basically, you have to have a file called syncinfo.xml in the tftp root > directory, with the following contents: > > <SYNCINFO> > <IMAGE VERSION="*" SYNC="1"/> > </SYNCINFO> > > Also, in SIPDefault.cnf or the phone's configuration file, stick: > > sync: "0" > > somewhere so the phone's sync value doesn't match the value in syncinfo.xml. > > If you make a change of sorts, just run "sip notify reboot-cisco > <username>" at any time in asterisk and it'll send the notify to the phone. > > If the phone is in use, it waits until it's idle, once it is, it waits > 20 seconds and then checks the syncinfo.xml file, and if the values of > sync are different, it reboots :)
Hi Aron! What Cisco phone do you use? I use 7940 with SIP firmware version POS3- 07-5-00. For me it works but on wery strange, I shuld say wrong way. I have put syncinfo.xml in tftp root and when I enter this in * CLI pbx*CLI> sip notify reboot-cisco 201 202 Unable to find notify type 'reboot-cisco' pbx*CLI> sip notify cisco-check-cfg 201 202 Sending NOTIFY of type 'cisco-check-cfg' to '201' Sending NOTIFY of type 'cisco-check-cfg' to '202' Like you said, after 20s it looks for two files in tftp root dir - dialplan.xml (why?) and syncinfo.xml. Then Cisco waits. I have wait for more then 12 min and nothing happened. Then when I decaided to pick up handset, then it started to reboot. He reboots for 2-3 min. If my boss needs to make a "important" phone call I'll get fired :)) Why he vaits that I pick up handset (or press any bottun)? Anyway, thank you for this one (if I don't get fired :)) -- Tomislav Parcina [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
