Don't forget to reverse the FXO/FXS in the TA750. They are opposite to the asterisk config files. Uriel
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jason Piterak Sent: Tuesday, October 14, 2003 5:13 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] T100P to Adtran TA750 - No dialtone or ring Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm hoping I'm overlooking something stupid. Thanks ahead of time... --Jason Here are some (possibly) relevant snippits from various places: o T100 LED shows green... o Not showing any errors in /var/log/asterisk/messages (debug logging enabled) o Adtran config is set to: --> 2. Provisioning Templates --> 1. Factory Default (ESF,B8ZS,Loopstart)' o OS/hardware: System OS: debian testing/unstable kernel: Custom 2.4.22-ck (Con Kolivas patch set: o Preempt o Low-latency o AA vm hacks o RL2 Desktop Tuning o Debian logo in FB) Digium Cards: T100P -->FXS X100P -->FXO o Asterisk version: Asterisk CVS-10/02/03-17:52:20 ------------------ asterisk:~# cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0" B8ZS/ESF IRQ misses: 21904 1 WCT1/0/1 FXOKS (In use) 2 WCT1/0/2 FXOKS (In use) 3 WCT1/0/3 FXOKS (In use) 4 WCT1/0/4 FXOKS (In use) 5 WCT1/0/5 FXOKS (In use) 6 WCT1/0/6 FXOKS (In use) 7 WCT1/0/7 FXOKS (In use) 8 WCT1/0/8 FXOKS (In use) 9 WCT1/0/9 FXOKS (In use) 10 WCT1/0/10 FXOKS (In use) 11 WCT1/0/11 FXOKS (In use) 12 WCT1/0/12 FXOKS (In use) 13 WCT1/0/13 FXOKS (In use) 14 WCT1/0/14 FXOKS (In use) 15 WCT1/0/15 FXOKS (In use) 16 WCT1/0/16 FXOKS (In use) 17 WCT1/0/17 FXOKS (In use) 18 WCT1/0/18 FXOKS (In use) 19 WCT1/0/19 FXOKS (In use) 20 WCT1/0/20 FXOKS (In use) 21 WCT1/0/21 FXOKS (In use) 22 WCT1/0/22 FXOKS (In use) 23 WCT1/0/23 FXOKS (In use) 24 WCT1/0/24 FXOKS (In use) ------------ asterisk:~# cat /proc/zaptel/2 Span 2: WCFXO/0 "Wildcard X101P Board 1" 25 WCFXO/0/0 FXSKS (In use) ----------- asterisk:/etc/asterisk# cat /etc/zaptel.conf #T1: span=1,0,0,esf,b8zs fxoks=1-24 loadzone = us defaultzone=us #X100P - Single-line FXO card fxsks=25 --------- asterisk:/etc/asterisk# cat zapata.conf ... [channels] ;T1-fxo (incomming channels) on the channel bank ;----------------- ; <Section commented out until we have an fxo card in the CB> ;context = bell ;language = en ;signalling = fxs_ks ;usecallerid = yes ;hidecallerid = no ;echocancel = yes ;echocancelwhenbridged = no ;;if immediate is set to yes, asterisk will automatically answer the line ;;and jump to the 's' extension for the context. ;;immediate = yes ;group = 1 ;channel => 1 ;T1-fxs (inside handsets) on the channel bank context = local language = en signalling = fxo_ks rxwink = 300 usecallerid = yes hidecallerid = no callwaiting = no ;callwaitingcallerid=yes <--Change if Callwaiting is yes threewaycalling = yes transfer = yes cancelforward = yes callreturn = no echocancel = yes echocanelwhenbridged = no immediate = no rxgain=0.0 txgain=0.0 channel => 1-24 ... ;SinglePort-fxo (incomming channels) context = bell language = en signalling = fxs_ks usecallerid = yes hidecallerid = no echocancel = yes echocancelwhenbridged = no ;if immediate is set to yes, asterisk will automatically answer the line ;and jump to the 's' extension for the context. immediate = yes group = 1 channel => 25 ------------- Console during a call being routed to zap/1: -- Starting simple switch on 'Zap/25-1' -- Executing BackGround("Zap/25-1", "thankyou") in new stack -- Playing 'thankyou' == CDR updated on Zap/25-1 -- Executing Goto("Zap/25-1", "mainmenu|s|2") in new stack -- Goto (mainmenu,s,2) -- Executing BackGround("Zap/25-1", "greeting-announcements") in new stack -- Playing 'greeting-announcements' == CDR updated on Zap/25-1 -- Executing Goto("Zap/25-1", "routing|300|1") in new stack -- Goto (routing,300,1) -- Executing Macro("Zap/25-1", "oneline|300|Zap/1") in new stack -- Executing DBget("Zap/25-1", "fwdexten=CFU/300") in new stack -- DBget: varname=fwdexten, family=CFU, key=300 -- DBget: Value not found in database. -- Executing Goto("Zap/25-1", "s|4") in new stack -- Goto (macro-oneline,s,4) -- Executing Dial("Zap/25-1", "Zap/1||") in new stack -- Called 1 -- Zap/1-1 is ringing -- Zap/1-1 is ringing -- Zap/1-1 is ringing -- Zap/1-1 is ringing -- Zap/1-1 is ringing -- Hungup 'Zap/1-1' == Spawn extension (macro-oneline, s, 4) exited non-zero on 'Zap/25-1' in macro 'oneline' == Spawn extension (routing, s, 1) exited non-zero on 'Zap/25-1' ---------------- asterisk:~# lsmod Module Size Used by Not tainted soundcore 3876 0 (autoclean) wcusb 21888 0 (unused) wcfxo 8352 1 wct1xxp 12704 24 zaptel 180064 54 [wcusb wcfxo wct1xxp] ppp_generic 17668 0 [zaptel] slhc 5216 0 [ppp_generic] serial 48228 1 (autoclean) sis900 14476 1 crc32 2896 0 [sis900] -- --------------------------------------------- Jason Piterak CIS Technical Services Public Key available at: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4966BB8C _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
