/etc/conf.d/local.start
-----Original Message----- From: Francesco Peeters (Asterisk) [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 11, 2006 3:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Zaptel modules load, but Asterisk fails at startup On Wed, January 11, 2006 21:36, Stephen Bosch said: > Francesco Peeters (Asterisk) wrote: >> On Wed, January 11, 2006 19:35, Stephen Bosch said: >> >> Try running ztcfg -vvv > > Yes, that fixes it -- my question, I guess, is how to get that to run > automatically at boot time... > > -s Either put it in rc.local or in /etc/modules or /etc/modprobe.conf or whatever the equivalent is on gentoo For example in my /etc/modprobe.conf: install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg alias wcfxs wctdm HTH -- F Peeters PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch 2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0 Cologne HFC-S pins #52, #54, #55 connected in parallel for synching. AMD Duron 1GHz - 1GB - * 1.2.1 2 Sweex HFC-PCI cards _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
