On 1/11/06, John Crew <[EMAIL PROTECTED]> wrote: > Any cheaper, equally reliable way to do this? > Looks like a base Rhino channel bank with a 4 > port FXS card will run me about $900.
I think you still need the dual span T1 card from Digium for this, which doesn't save you much, since an Adit 600 with 8 FXS doesn't realy cost more than that (search eBay). > > ---- Begin Original Message ---- > > From: Jerry Jones <[EMAIL PROTECTED]> > Sent: Wed, 11 Jan 2006 12:46:35 -0600 > To: Asterisk Users Mailing List - Non-Commercial > Discussion<[email protected]> > Subject: Re: [Asterisk-Users] Recommend Fax > Hardware for T1 PRI > > > > On Jan 11, 2006, at 11:12 AM, C F wrote: > > > You could use a 2 span T1 card from Digium and > plug one span into a > > channel bank, and have FXS ports on the CB for > the fax machines. With > > the latest firmwares from Digium these streams > are bridged internaly > > on the card, and don't even come on to the PCI bus. > > I can vouch this works very well. I do so with a > 4port card and 1 or > 2 Adits. All the traffic stays TDM and just works. > > Although I am presently exploring using 24port > FXS devices peering > with T1 gateway devices to replace this. Much > more flexibility. > _______________________________________________ > --Bandwidth and Colocation provided by > Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ---- End Original Message ---- > > > > Sent by Go2net Mail! > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
