On Wed, Oct 15, 2003 at 12:02:18AM +0200, Roger Schreiter wrote: > Hi, > > my asterisk experiences with isdn cards supported by i4l
Out of interest, which cards. > are not very good, but with avm a1 and capi everything > works very fine and stable. (SuSE Linx 8.2, Kernel 2.4.20, > german ISDN). Heard good things about capi and AVM, but unfortunately none are approved for Australia :-( > Now I want to connect a T1. Should I use an AVM T1-B > for approx 6000 EUR or is it ok to use one of Eicon's cheaper > Diva Server BRI S2M cards? T1 = ISDN PRI in the US/Japan (24 lines) ISDN BRI = 2 lines So I don't think that card would work, you want a US PRI card if they make one. If you are in Germany, I think you want E1 = ISDN PRI outside US/Japan (30 lines) and for that you want a E100P for US$595 from digium. > Do they use i4l or is there a similar thing as AVM's capi > driver for eicon's S2M cards? I think there is a channel driver for the eicon, but I don't know where from. > Are there any experiences how they compare when used > with asterisk? I am interested in this too, the Eicon cards are also certified for Australia. cheers, -- Woody _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
