i suffer the same double ring tone on our 1.2.1 box. 1.0.9 box ha no such problem. i used the r to solve it but this is not a good solution though.
Best Regards matt __________________________________________________ ----- Original Message ----- From: "Simone Cittadini" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Saturday, January 14, 2006 6:32 AM Subject: Re: [Asterisk-Users] double ringing tone on asterisk 1.2 > Rich Adamson ha scritto: > > >>>>the problem appears no matter where I terminate the call (IAX or > >>>>Zap), and I don't have that problem on a 1.0.7 connected to the same > >>>>PRI lines and IAX servers , what I have to check ? looked in confif > >>>>files but appears to be the same (indications, modules loaded, iax, > >>>>zapata, the dial in extensions is the same) > >>>> > >>>> > >>>Are you by chance including an "r" option in the dialplan entries > >>>associated with these calls? > >>> > >>>If so, try removing it. > >>> > >>> > >>no, I'm including it on client asterisk boxes to partially solve the > >>problem (since it stops the double tuuu and sends a fake ringtone till > >>the call is answered), but it's not a nice solution since you have no > >>real call indication > >> > >> > > > >Since there does not seem to be anyone else complaining about the same > >problem, there must be something in your config that is causing it. > >Without specific copy/paste samples of what you've configured, no one > >is going to be able to guess at what you are doing. > > > >Given the issue is happening with both PRI's and IAX links, I'd have to > >guess that you've got something wrong in extensions.conf. > > > > > > > > > is something like : > > exten => _X.,1,AGI(agidial.py|${EXTEN}) > exten => _X.,n,Dial(${STR_DIAL}) > > where STR_DIAL is given the right value by the agi, something like > '/zap/g15/00511265' > and on the cli I can see > > -- Accepting AUTHENTICATED call from xxx : > > requested format = alaw, > > requested prefs = (), > > actual format = alaw, > > host prefs = (alaw|g726), > > priority = mine > -- Executing AGI("IAX2/xxx-39", "agidial.py|00511265") in new stack > -- Launched AGI Script /var/lib/asterisk/agi-bin/agidial.py > -- AGI Script agidial.py completed, returning 0 > -- Executing Dial("IAX2/xxx-39", "Zap/g15/00511265") in new stack > -- Requested transfer capability: 0x00 - SPEECH > -- Called g15/00511265 > > the complete call path is : > lynksys pap -sip> asterisk client -iax> asterisk server -zap||iax> > somewhere outside my scope > > or : > lynksys pap -sip> asterisk server -zap||iax> somewhere outside my scope > > the problem occurs in both cases > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users