-----Original Message----- From: Gregory Wiktor - ADCom Corp. Sent: Sunday, January 15, 2006 3:29 PM To: 'Patrick' Subject: RE: [Fwd: RE: [Asterisk-Users] Adit 600 and echo]
Hello Patrick, I believe mine is the 2572. 64ms EC. Power supply: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7574802048 Yes got them off ebay, but keep your eye open. I just checked, I got the EC for only 30.49 including shipping from ebay :) http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5824630277 Yay... I'll try to take some pictures this week for the wiki... The soldering is easy but it will require good quiet time. Then I ran the lines 2 a 2 port cat6 block. Greg -----Original Message----- From: Patrick [mailto:[EMAIL PROTECTED] Sent: Sunday, January 15, 2006 10:22 AM To: Gregory Wiktor - ADCom Corp. Subject: [Fwd: RE: [Asterisk-Users] Adit 600 and echo] -------- Forwarded Message -------- > From: [EMAIL PROTECTED] > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > <[email protected]> > To: [email protected] > Subject: RE: [Asterisk-Users] Adit 600 and echo > Date: Sun, 15 Jan 2006 03:50:10 -0500 > > See my other post. I had the exact same problem on about 5 lines. > > I got a tellabs ec a while back, and then a power supply but hadn't > the time to solder it up and get things going...I had just been > forwarding the inbound calls to voicepulse connect. > > I finally did get it soldered and ready, and when I installed the new > hardware tellabs ec, echo was gone. I must have spent 10-20 hours on > this problem, and the tellabs solved it in 5 minutes (once setting the > channel properties to FXO-LS & FXS-LS) > > I think it cost something like $110 for the card, and $86 for the > power supply. Then you need the time to do the soldering. Greg, Can you please tell me the modelnumber of the Tellabs' card and power supply and any info/links regarding the soldering? Where did you buy the card and power supply, eBay? Thanks and regards, Patrick _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
