Thanks for all the posts everyone
So yes, we have 4 channels, so I'm going to need 2x Fritz cards -- but I would rather not have to apply patches just to get the two PCI cards to work in the same box The price difference between the cards you guys mentioned is interesting I have also heard about BERONET isdn cards? a single Beronet 4-channel card would suffice I think? Thing is, whatever the legacy system in place already is (this is not a fresh operation) must have some sort of minor PBX in place, where all the phones are plugged in. So I would have to remove that and could use a TDM card to plug the phones in? These phones, isdn etc -- probably aren't analog -- probably don't work with a TDM card right? So I think what you were suggesting John is ISDN channel cards and a TDM in the same machine? with * just bridging calls between the two? Interesting. :-S Chris Earle ----- Original Message ----- From: "John Daragon" <[EMAIL PROTECTED]> To: "Chris Earle (CBL)" <[EMAIL PROTECTED]>; "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Wednesday, January 18, 2006 6:45 AM Subject: Re: [Asterisk-Users] Fritz card technology & German * > Chris Earle (CBL) wrote: > > Hi all, > > > > I've been working with * for a long time now, but only with analog FXS/FXO > > systems. > > I am venturing towards setting up a box in Germany now and I believe that > > requires a Fritz card? Do I even have to use the Fritz cards? Why not a > > Digium card.... > > The AVM Fritz card is a single connection (2 x 64 kbps) passive ISDN > card. It's well supported by chan_capi, but running more than one of > them in a PC requires a driver patch. > > You can't use a Digium card because Digium doesn't make an ISDN2 card. > > > > > We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 > > Fritz PCI cards (they have 1 port only). Then there's some sort of channel > > bank that sends the calls out to the extensions. > > Does this make any sort of sense? > > By 2 lines I guess you mean 4 channels ? i.e. 4 simultaneous calls ? If > you mean 2 channels, then you only need 1 fritz card. > > > > Could someone confirm with me that this is the right direction to go -- ISDN > > lines, Fritz cards/Asterisk box, Channelbank/telco-box, extension > > handsets...... > > On the handset side you could use a couple of TDM4xx cards, or just use > SIP phones. > > jd > > -- > > John Daragon [EMAIL PROTECTED] > argv[0] limited (Asterisk implementation & consultancy) > Lambs Lawn Cottage, Staple Fitzpaine, Taunton, TA3 5SL, UK > v +44 (0) 1460 234068 f +44 (0) 1460 234069 m +44 (0) 7836 576127 > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
