On Wed, 2003-10-15 at 14:48, rnc Info Lists wrote: > > On Wed, 2003-10-15 at 14:16, rnc Info Lists wrote: > >> Yes, I am a newbie too. I am having a problem with meetme. From what I > >> have seen it will work without a Digium card but with audio problems. My > >> goal is just to see how it works not the quality of the audio. > >> > >> When I dial into the conference room the following message is played: > >> "That is not a valid conference number." > >> > >> On the console I get: "unable to open pseudo channel". > >> > >> As indicated in previous posts I do not have any Digium cards in the > >> system. When making the zaptel part of the system I did uncomment > >> ztdummy.o in the MODULES= line. > > > > did you actually install the module into your running kernel? > > > > -- > Steve, > I have the following line in /etc/modules.conf: > post-install ztdummy /sbin/ztcfg > > Is that what you mean or did something else need to be done that I > missed.
All this does is tell the module utilities to run ztcfg after loading the driver. It does nothing to load the driver. Do a lsmod and see what modules are installed. If you don't see the ztdummy module, then do a modprobe ztdummy. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
