Hi All, Greg has been a huge help getting me going with this tellabs echo can, but I'm still having some problems getting it to work... I suspect I wired it up incorrectly, so I thought I'd see if anyone can point me in the right direction. Digium tech support pointed me to this doc for a standard T1 cable:
http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm which looks like it means: pin1 = recieve ring pin2 = recive tip pin4 = send ring pin5 = send tip So I treated the bottom part of the diagram like a noraml cat5 cable & connected it in this way: Zap side | 2572 side -------------------- pin 1 <=> pin 25 pin 2 <=> pin 21 pin 4 <=> pin 10 pin 5 <=> pin 6 on the T1 side I have: T1 side | 2572 side --------------------- pin1 <=> 26 pin2 <=> 22 pin4 <=> 9 pin5 <=> 5 In the wiki page for these pinouts are listed as T1 side(drop) 5 Send In Tip 9 Send In Ring 22 Receive Out Tip 26 Receive Out Ring Zap side (line) 21 Receive In Tip 25 Receive In Ring 6 Send Out Tip 10 Send Out Ring and I'm not sure what the 'in' & 'out' desinations mean.... can anyone help me or point me in the right direction for wiring this bugger up? perhaps I did do it correctly & the can isn't configured yet (just did that, but can't test till 2night when the office clears out) Thanks in advance for any insights Dan _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
