You are correct; it is a 2 channel BRI card. I am using it with Telstra ISDN2 On-Ramp service.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, 16 October 2003 10:12 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] e100p in Australia I looked at the FRITZ card but as far as i could see it's a 2 channel BRI card I need PRI, or is ther eanother one I missed? Quoting "Michael A. Miller" <[EMAIL PROTECTED]>: > Just a couple of notes on the ISDN issue in Australia... > > I agree with the audio quality of the NETjet-s. I also had a horrible time > working out the DTMF detection under ISDN4Linux. Overall, I can not fault > the hardware and guys at Traverse were quick to help out but it is not > production quality for audio. > > I finally had to switch to the AVM FRITZ!Card PCI. It is A-Tick approved. > The local distributor is listed on their website. The audio quality is > great and there are no DTMF issues with the card. > > Please feel free to let me know if anyone would more info on my > experiences with both cards. > > > Michael > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Anthony Wood > Sent: Wednesday, October 15, 2003 5:01 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] e100p in Australia > > On Wed, Oct 15, 2003 at 12:50:33PM -0500, Stephen Dredge wrote: > > > > I've seen this question asked before but haven't seen a definative > answer. > > Does the e100p work in australia? Did any one who was asking the > question > > You need written permission from your Telco to use non-approved hardware, > I think US $595 + AU $10,000 fine is more than US$1495 :-) > > > before bite the bullet and get one? I can get a te410 if i really have > to but > > would prefer to stay with the cheaper option. > > NetJet-S apparently works with ISDN BRI (E.g. onramp 2) and Asterisk, but > there > are some echo issues for the local end of the call. > > There was a Melbourne guy using one, I'm not sure how he's gone in the > last 4 months: > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Mark > > McKibbin > > Sent: Friday, 13 June 2003 1:01 p.m. > > To: [EMAIL PROTECTED] > > Subject: [Asterisk-Users] E1 cards > > > > > > We are not having any luck with the E100p card here in Australia, it > > will work with a crossover cable to another device but will not talk to > > our Telco Telstra who probably have a weird implementation of an E1. > > > > Any suggestions on a replacement? > > > > Regards > > > > Mark McKibbin > > DCS Internet > > 64 Queen St > > Warragul > > Victoria 3820 > > Australia > > www.dcsi.net.au > > [EMAIL PROTECTED] > > Ph. 1300 665575 > > Fx. 1300 556595 > -- > Woody > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users