Yes, we have disabled the dch and loop several times (both on Nortel and Asterisk sides). We also disabled the entire MSDL card and issued a full download to both the MSDL and the DCH. Neither got us any further.
Have you had success getting PRI between a Nortel 81C and Asterisk to work? Thanks, Greg > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Steve Rawlings > Sent: Tuesday, January 24, 2006 2:16 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Nortel Meridian Opt 81C and PRI > > ---- Original Message ----- > From: "Greg Camp" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, January 24, 2006 3:07 PM > Subject: [Asterisk-Users] Nortel Meridian Opt 81C and PRI > > > We've been trying unsuccessfully to connect our Meridian Option 81C to a > TE110P via PRI. We've followed the directions in > asterisk-meridian-a1.pdf (link on > http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it > doesn't seem to work on our 81C (even though many, many users report it > works very well on Option 11's). > > Has anyone had any success in getting the above combination to work with > Asterisk? > > The results we get seem to vary depending on how closely we follow the > reference guide that Andy put together. If we follow it exactly, the > d-channel comes up, but the b-channels stay in MBSY instead of IDLE. > > I can post more details and config files if requested, but I'm curious > if anyone has successfully made an Option 81C work with PRI to an > Asterisk box. > > Thanks, > > Greg > [EMAIL PROTECTED] > Excell Services > 806-747-2474 > 806-747-5047 fax > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > Hi, > > You've probably already tried it but if not, give this a go, > > 1)dis dch, 2)dis loop, 3)enable loop, 4)enable dch as below - > > ld 96 > stat dch > DCH XX : OPER RLS AUTO - response maybe > > dis dch [whatever d ch no.] > **** > ld 60 > > .stat > > PRI2 LOOP YY - ENBL > REF CLK: DSBL > SERVICE RESTORE: NO > ALARM STATUS: OOS NO AUTO STRT > CH 01 - MBSY TIE VOD * - response maybe > > disl [whatever loop no.] > OK - response > > enll [whatever loop no.] > OK - response > **** > ld 96 > enl dch [whatever d ch no.] > > DCH: Y EST CONFIRM TIME: .......... > DCH: Y EST REMOTE TIME:........... - response maybe > > stat dch [whatever d ch no.] > DCH XX : OPER EST ACTV AUTO - response hopefully > > also try dis and re-enable the asterisk end. > > Steve > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
