The issue with the 10BaseT in the 102 is not the autosensing by the switch/hub. The problem arises when using the 102 as a local hub for your PC. Anything that you plug into the Net port on the 102 comes out at 10BaseT. If you want to run your PC at 100BaseT, you need an extra cable from the 100BaseT Switch/Hub, regardless of the autoswitching capacity.

Stephen R. Besch

costas wrote:

This is troubling. Shouldn't your hubs/routers autosense the 10MBPS?

---------- Original Message ----------------------------------
From: WipeOut <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Date:  Wed, 15 Oct 2003 07:53:13 +0100



Steven J. Sobol wrote:



On Wed, 15 Oct 2003, Jon Pounder wrote:


Nothing works. Call transfer and call waiting, in particular. (Well, almost nothing; vm notification does work)





Call transfer and call waiting do work, although the call waiting is a little loud and anoyoing.. :)



There is no place to plug in a headset, and since I do a fair amount of tech support and longish conference calls, that's a big deal for me.



A very valid point, but I also have a Snom200 and I have never been able to get the headset (audiojacks on the back) to work.. and this has been through about 10 firmware versions..

So which is worse, No headset jacks or headset jacks that never work?? :)

The only real issue I have with the GS phones is that the ethernet ports are 10Mbps ports.. So this is a problem because most people use 100Mbps networks now.. So I would have to run seperate cables to the phone and PC which kills a major cost saving for going VoIP..

Later..

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users




-- Costas Menico Meezon Software Corp 201-224-8111 [EMAIL PROTECTED]

--
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users







_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to