What you have are DID trunks, you need to know what signaling they use E&M E&M Wink, E&M Wink Immediate.
If you can checkthe config on your existing PBX it may ell you. If not you may need to call the Telco and (gasp!) ask! > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Asterisk User List > Sent: Wednesday, January 25, 2006 8:43 AM > To: [email protected] > Subject: [Asterisk-Users] ZAP - Can't pickup calls on Analog Trunk > > >Are the trunks just pots lines (plain old telephone service lines)? If > you don't know you could put an analog phone > >on the incoming lines and verify you can dial out. Also, if you call > the line the phone should ring. If this is > >true then you will need fxoks in your pbx instead of the fxsks. > > They are lines from the phone company but unlike normal phone lines in > the fact that they have multiple numbers per trunk line. Such as trunk > 1 has the following numbers assigned to it: > 555-1111 > 555-1112 > 555-1113 > 555-1114 > 555-1115 > > On the old PBX these lines are picked up and the then the called number > is checked, from there the call is routed to the appropriate desk phone. > Because of that I am not sure I can plug a standard phone in and get > that phone to ring, I will give it a shot and see what happens. I can > however make calls out of the trunk through Asterisk this leads me to > believe that it is correct to have FXO ports using fxsks instead of FXS > with fxoks. > > Phil Smith > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
