On 1/26/06, bails <[EMAIL PROTECTED]> wrote: > Chris Bagnall wrote: > >>Hi I'm looking for a pinout for the above. Note this has > >>what i'd call > >>RJ45 sockets (or someone smart can correct me). I need to > >>plug into BT (rj13?). > > > > > > Are you sure the TDM400 has RJ45 sockets? The pair I've got here have RJ12 > > sockets. > > > > I assume with the mention of BT, you're in the UK. The line is on pins 2+5 > > of the BT connector, which'd usually translate to the 2 inner pins of an > > RJ11 connector (pins 2+3). You should find an old modem cable will do the > > job fine. > > > > If your TDM400 really does have RJ45 sockets, then you'd expect the line to > > be on the middle pins (pins 4+5), similar to a modtap used in structured > > cabling environments. > > > > Regards, > > > > Chris > Thanks, yes they are rj45, we have had rj12 in he past I look at the above. > > Like I said though, pity Digium dont supply the information on there > site or with the cards, its a bit like everything in life today. We are > only the customer, but we're expected to do the running around. >
Earlier versions of the TDM400 I believe were RJ45. They were changed to RJ11 I think I had heard at one point for compliance with some telco standards outside the US. But, in either case, yes, the middle pair is the "active" pair for your FXO/FXS ports on these cards whether RJ11 or RJ45. -- Bird's The Word Technologies, Inc. http://www.btwtech.com/ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
