I am trying to tweak my dial plan and I am running into a problem.
Sometimes my VoIP out bound calls do not complete on overseas calls(busy
or just a hang-up). Is there a way in the dial plan to automatically
dial out of my PRI when something like this happens. Either by time
limit by a failure event?
Any point in the right direction would be great
Thanks,
CLI output (cleansed to protect the innocent)
-- Executing Dial("Zap/47-1",
"IAX2/VoIPServicePrividerOUT/011XXXXXXXXXXXX") in new stack
-- Called VoIPServicePrividerOUT/011XXXXXXXXXXXX
-- Call accepted by 72.34.43.5 (format g729)
-- Format for call is g729
-- Channel 0/23, span 2 got hangup request <----here I get a busy
signal
-- Hungup 'IAX2/ VoIPServicePrividerOUT-1'
[Outbound context]
exten => _9011.,1,Macro(dialout-trunk,4,${EXTEN:1},)
exten => _9011.,2,Macro(dialout-trunk,2,${EXTEN:1},)
exten => _9011.,3,Macro(outisbusy) ; No available circuits
exten => _918.,1,Macro(dialout-trunk,2,${EXTEN:1},); 800 numbers to the
PRI
exten => _918.,2,Macro(outisbusy) ; No available circuits
exten => _9Z.,1,Macro(dialout-trunk,4,${EXTEN:1},)
exten => _9Z.,2,Macro(dialout-trunk,2,${EXTEN:1},)
exten => _9Z.,3,Macro(outisbusy) ; No available circuits
Richard
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
