Hi everybody I've just installed a new Redhat 8.0 and configured it with Asterisk, zaptel and libpri. Afterwards I installed a TE410P and configured this as well. But when starting Asterisk I get the following error message:
------------------------------------------------------- -- Registered channel 1, PRI Signalling signalling ..... -- Registered channel 15, PRI Signalling signalling == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI) == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI) ERROR[16384]: File chan_zap.c, Line 6249 (start_pri): Unable to open D-channel 24 (No such device or address) ERROR[16384]: File chan_zap.c, Line 7003 (load_module): Unable to start D-channel on span 1 WARNING[16384]: File loader.c, Line 301 (ast_load_resource): chan_zap.so: load_module failed, returning -1 WARNING[16384]: File loader.c, Line 396 (load_modules): Loading module chan_zap.so failed! ------------------------------------------------------- But the weird thing is that I only define channel 1-15 as bchan and 16 as dchan in zaptel.conf (which by the way works fine on a similar setup) If I try to define channel 24 as dchan I get no errors but the ISDN line doesn't work anyway. After running ztcfg, zttool says red error for all 4 lines and I know there should be a connection to the ISDN on the first one. I've copied the configuration from the other machine so nothing differs here. I've also tried with a couple of different CVS versions of asterisk. regards Mickey Binder ,E,z&j)b b,E,z%lv("g(mlv("g(Ybا~ڲ.