> JanM wrote:
>
> > Hello,
> >
> > Does anyone know how to set the outgoing CallerID properly
> when using Snom200/SIP/CAPI/BRI?
> >
--SNIP--
> > My mobile is only showing some other number that my isdn
> line is having.
> >
> > ---JanM---
> Telecom restrictions?
> I can set only caller IDs within the set of numbers provided
> me from telecom.
> Check with your telecom if you're allowed to set any caller ID.
I'm experiencing the exact same behavior.
I have an E1 line (using TE410P) with 30 numbers associated to it, and I know that I'm
allowed to change the outgoing CallerID, because our production PBX is a Lucent
ArgentBranch, and when dialing out from this the CallerId displays correct. I've tried
some different configurations in order to get it to work but without luck.
This is a snip of my extensions.conf
[Outgoing]
;
;Outside access via Zaptel interface (PRI)
exten => _XX.,1,SetCallerId(4330xxxx)
exten => _XX.,2,Dial,Zap/g1/BYEXTENSION
The main isdn number is 4399xxxx and is the only number I can get displayed when
calling.
regards
Mickey Binder
,���E,z�&j)b� b��,���E,z�%��lv("�g(�m����lv("�g(����Y���b�ا~�ڲ��.���
