Hi there, Don't think you have to recompile * if you've already compiled * with zaptel before. (chan_zap.so exists)
Should just have to rebuild zaptel, install the module, and do a ztcfg Good luck, ----- Original Message ----- From: "Brent Torrenga" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, January 30, 2006 11:34 AM Subject: [Asterisk-Users] Need to recompile * after changing zap echo method? > Dearest List, > > I guess I missed this point: Is it true that if you change the echo canceler > in zconfig.h, and then recompile/install your zap modules, that for this to > be taken into effect by * you must then recompile/install *? > > I would have figured that the zap echo cancellation method was independent > of *, and I don't recall seeing any docs mentioning either way. > > > Sincerely, > > Brent A. Torrenga > [EMAIL PROTECTED] > > Torrenga Engineering, Inc. > 907 Ridge Road > Munster, Indiana 46321-1771 > > 219.836.8918x325 Voice > 219.836.1138 Facsimile > www.torrenga.com > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
