This isn't correct in all situations. The gain adjustments are in
percentages, and if you need a LOT of gain to compensate for the signal
loss from the CO, then 0.1% really _does_ make a difference.
For example, when I'm watching the output of the CO's milliwatt
generator, an addition of 0.05 on the rxgain brings my 148xx to over
15000. That's _half_ a /tenth/ of a percent.
Moj
Rich Adamson wrote:
Need to stop asterisk and restart it. A reload will not take the new setting
into consideration. There is no need to stop/start the zaptel drivers, just
asterisk itself.
OK.
If I set the gain to a negative number then i decrease the volume? And a positive number
increases the volume?
That's correct. Don't bother with 1/10ths. Just use -2 or 4 or 0 or whatever.
You can enter tenths, but its really not going to get you anywhere.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mojo <[EMAIL PROTECTED]>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
