Num and Number are aliases, I believe. I just tried it and I got the same error..
Thanks. On 2/1/06, Jason Adams <[EMAIL PROTECTED]> wrote: > Have you tried this: > > exten => _9.,1,Set(CALLERID(num)=<MAINNUMBER>) > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Gary > Richardson > Sent: Wednesday, February 01, 2006 12:47 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [Asterisk-Users] CallerID Problem > > Hey, > > I'm using a Cisco 2811 to make calls out to a PRI. My asterisk box > connects to it using SIP. The asterisk version is 1.2.0. > > In my sip.conf, I set callerid="First Last" <exten> > > When I make a an outbound call with the following macro: > > exten => _9.,1,Dial(SIP/${EXTEN}@<ROUTER>,,w) > exten => _9.,2,Congestion() > > The caller id is set to the extension that's defined in sip.conf. > > If I try something like: > > exten => _9.,1,Set(CALLERID(number)=<MAINNUMBER>) > exten => _9.,2,Dial(SIP/${EXTEN}@<ROUTER>,,w) > exten => _9.,3,Congestion() > > I get the following error: > > -- Got SIP response 488 "Not Acceptable Media" back from <ROUTER> > > It all works fine if I don't set the caller id.. Any ideas on why this > may be happening? > > Thanks. > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
