On Wed, 1 Feb 2006, Aldo Bergamini wrote: > [EMAIL PROTECTED] is believed to have said: > > >chan_capi does not set the NT-mode. Your cards driver need to do that. > >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl > >or set NT-mode in the config wizard. > >chan_capi does not (need) to know anything about what protocol the card is > >doing. CAPI is independent here. > > Ok. > > >Anyway, if the card is set to NT mode, you should specify ntmode=yes > >in the capi.conf to tell chan_capi to handle the progress better > >(get progress tones). > > Fine! > > One last related subpoint: while Eicon Diva cards have their own setup > application, is there anything standard to control the basic setup of > generic HFC-S cards? (something similar to the ztconfig tool for analog cards)
Sorry, I cannot answer that one. I don't know enough about these cards and their drivers. > >capi driver? I think you mean chan_capi? Yes it does support > >TE and NT mode, as well as DSS1, 1TR6, JAPAN, NI1, QSIG, 5ESS, and a lot > >more protocols. > > Yes, I meant actually the chan_capi module... Nice to know. > > >The card and the cards driver need to support/provide this. > > > >Armin > > So in the end there a lot of reasons to go for a 'better' card. Yes, a lot reasons. But actually, it depends on what you need and what you want to do. Armin _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
