I appreciate all of your help. I'm starting to think this is a setup/hardware
issue with the channel bank myself. I bought the FXO card off of EBay, so who
knows what kind of shape it's in.
Does anyone else out here on the forums know how to configure a CAC Access Bank
II SNMP channel bank to work with Asterisk?
Thanks,
James
C F wrote:
> Then I got no clue how to configure it. But it looks like something is
> wrong in that setup there.
>
> On 2/1/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>> No, it's an Access Bank II SNMP.
>>
>> Thanks,
>>
>> James
>>
>> C F wrote:
>>> Is this an Adit 600?
>>>
>>> On 2/1/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>>>> The output from the CLI when I put in an inbound call is the following:
>>>>
>>>> -- Starting simple switch on 'Zap/25-1'
>>>> -- Executing GotoIf("Zap/25-1", "1?from-pstn-reghours|s|1:") in new
>>>> stack
>>>> -- Goto (from-pstn-reghours,s,1)
>>>> -- Executing GotoIf("Zap/25-1", "0?from-pstn-reghours-nofax|s|1:2") in
>>>> new stack
>>>> -- Goto (from-pstn-reghours,s,2)
>>>> -- Executing Answer("Zap/25-1", "") in new stack
>>>> -- Executing Wait("Zap/25-1", "1") in new stack
>>>> -- Executing SetVar("Zap/25-1", "intype=EXT-412") in new stack
>>>> -- Executing Cut("Zap/25-1", "intype=intype|-|1") in new stack
>>>>
>>>> It then goes on to call the extension I have setup. I think it's coming
>>>> in on Channel 25, but I'm not sure what the -1 is for in Zap/25-1.
>>>>
>>>> Not sure if this is relevant or not, but I'm using a Carrier Access
>>>> Corporation (CAC) channel bank, with 1 FXO card and 1 FXS card. The
>>>> analog line is definitely hooked to the FXO card, and I definitely have
>>>> the T1 plugged in to the FXO card.
>>>>
>>>> Thanks,
>>>>
>>>> James
>>>>
>>>>
>>>> C F wrote:
>>>>> Looks like channel 25 is not the one hooked up to your POTS, when an
>>>>> incoming call arrives, what channel does the CLI report?
>>>>>
>>>>>
>>>>> On 2/1/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>>>>>> Thanks for the reply. I have tried adding anywhere between 1 and 6 w's
>>>>>> to the dial string, but still no luck. I hooked up and listened on the
>>>>>> line when the call went out, and never heard any DTMF's. I'm sure this
>>>>>> must be something simple, I just can't seem to figure out for the life
>>>>>> of me what it is. What other information can I provide to help sort
>>>>>> this out?
>>>>>>
>>>>>> Thanks again,
>>>>>> James
>>>>>>
>>>>>> ------------------------------
>>>>>> You could insert a pause by adding a w before the number to be dialed,
>>>>>> like this:
>>>>>> Dial(zap/25/w1234567890) iirc each w puts a 500ms pause.
>>>>>>
>>>>>>
>>>>>> On 1/30/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
>>>>>>>> I am experimenting with an asterisk setup in my office. The last bit
>>>>>>>> I have to test is working with analog lines. I have TE411p digium
>>>>>>>> card, with an ISDN line plugged into the first, a channel bank plugged
>>>>>>>> into the second port, and the last two ports empty. I have the
>>>>>>>> following setup in my zaptel.conf:
>>>>>>>>
>>>>>>>> span=1,1,0,esf,b8zs
>>>>>>>> bchan=1-23
>>>>>>>> dchan=24
>>>>>>>>
>>>>>>>> span=2,0,0,d4,ami
>>>>>>>> fxsks=25
>>>>>>>>
>>>>>>>> And in zapata.conf, I have:
>>>>>>>> group=2
>>>>>>>> language=en
>>>>>>>> context=from-pstn
>>>>>>>> signalling=fxs_ks
>>>>>>>> channel=>25
>>>>>>>>
>>>>>>>> I have one analog line plugged in for testing. If I dial that analog
>>>>>>>> number, the inbound call arrives, and it works great. However, when I
>>>>>>>> place an outbound call, I get the following output:
>>>>>>>> -- Called g2/5148346
>>>>>>>> -- Zap/25-1 answered SIP/412-9b72
>>>>>>>>
>>>>>>>> However, my number never rings. After about 30 seconds, I get a
>>>>>>>> message saying my call could not be completed as dialed. Almost like
>>>>>>>> it didn't get all of the digits. Is there a way to inject a pause
>>>>>>>> before dialing? Any other thoughts? Any help is greatly appreciated.
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>>>>>
>>>>>>>> Asterisk-Users mailing list
>>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>>>
>>>>>> Asterisk-Users mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>>>
>>>>>> Asterisk-Users mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>>
>>>>> Asterisk-Users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation provided by Easynews.com --
>>>>
>>>> Asterisk-Users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> Asterisk-Users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> Asterisk-Users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
