Hmm, that's annoying.
If I Set(CALLERID(num)=) (ie, I unset it), the callerid is set to the
default on the router and everything works as expected..
Thanks guys :)
On 2/1/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> This is what i found on Cisco's site:
>
> "Symptoms: Media negotiation fails for SIP calls and the terminating gateway
> replies with a "488" message to an Invite message.
>
> Conditions: This symptom is observed on a Cisco platform when the terminating
> gateway is configured with the G279B (annex B) codec and when the Session
> Description Protocol (SDP) for the incoming Invite message does not have any
> FMTP attribute line, which means that the default value, that is, the G279B
> (annex B) codec, is used.
>
> Workaround: There is no workaround."
>
> Regards,
> Jan
>
> -----Ursprungligt meddelande-----
> Från: [EMAIL PROTECTED] genom Gary Richardson
> Skickat: on 2006-02-01 21:45
> Till: Asterisk Users Mailing List - Non-Commercial Discussion
> Ämne: Re: [Asterisk-Users] Re: CallerID Problem
>
> No, I'm not including the <> -- I was trying to show that it was
> something that I removed from my example..
>
> Thanks.
>
> On 2/1/06, Bromont Quebec <[EMAIL PROTECTED]> wrote:
> > Are you actually putting the < > in there?
> >
> > try:
> >
> > exten => _9.,1,Set(CALLERID(number)=MAINNUMBER)
> >
> > Hey,
> >
> > I'm using a Cisco 2811 to make calls out to a PRI. My asterisk box
> > connects to it using SIP. The asterisk version is 1.2.0.
> >
> > In my sip.conf, I set callerid="First Last" <exten>
> >
> > When I make a an outbound call with the following macro:
> >
> > exten => _9.,1,Dial(SIP/${EXTEN}@<ROUTER>,,w)
> > exten => _9.,2,Congestion()
> >
> > The caller id is set to the extension that's defined in sip.conf.
> >
> > If I try something like:
> >
> > exten => _9.,1,Set(CALLERID(number)=<MAINNUMBER>)
> > exten => _9.,2,Dial(SIP/${EXTEN}@<ROUTER>,,w)
> > exten => _9.,3,Congestion()
> >
> > I get the following error:
> >
> > -- Got SIP response 488 "Not Acceptable Media" back from <ROUTER>
> >
> > It all works fine if I don't set the caller id.. Any ideas on why this
> > may be happening?
> >
> > Thanks.
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
