Thanks Steve
We replaced an old Siemens that used to produce the outgoing numbers
correctly, so we must have the 3rd option.
The extensions are all set up to be in that range to provide DID. When
the SIP extensions dial out will they provide the extension number which
gets prefixed with what? Do I need to send the complete number, 3 digit
area code + 4 digit extension to the Telko? Does the zapata.conf add
the prefix? How can I check what callerid number is being passed to the
Telko?
Garth
Steve Underwood wrote:
Garth van Sittert wrote:
Hi All
I am having a problem setting the outbound callerid number on a PRI
E1 in South Africa. The outbound number keeps on appearing as the
main PRI number. How does it work between Asterisk and the Telko?
More importantly how do I get it working?
Kind Regards
Garth
Telcos usually arrange outgoing CLI in one of 3 ways:
- a free for all - you can put what you like as your CLI, and no
checks are made
- a rigid arrangement - no matter what you give as the CLI, the telco
will replace it with a fixed value before passing the message on
- a constrained arrangement - if you give a CLI within the range that
is valid for you, it will be passed on. If you give something which is
not allocated to you, the telco wil replace it with a fixed value.
Sounds like you do not have the first arrangement. You might have the
third, though. It could be you just aren't specifying your number
correctly - either the digits themselves or the TON/NPI pair might not
be right.
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Garth van Sittert
BSc (Physics & Computer Science)
-----------------
Mobile: +27 (0)83 791 6662
Email: [EMAIL PROTECTED]
Phone: 08600 BITCO
Web: www.bitco.co.za
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
