Garth,
this is my sip-configuration for a fax machine at a AT386
; SIP Accounts Analog devices like Faxmachines
[analogdefaults](!)
type=friend
host=dynamic
dtmfmode=info
disallow=all
allow=gsm
allow=alaw
allow=ulaw
[222](analogdefaults)
context=sip-ol
callerid="Fax" <222>
username=222
secret=123
;
The ATA adapter itself is configured as follows:
Fax Mode: (x) T.38 (Auto Detect) Pass-Through
so, I don't even have configured Pass-Through
Bernd
Garth van Sittert wrote:
I am using alaw and I have already enabled the pass through. Does alaw
and ulaw work?
I can fax out, but not receive faxes.
Garth
Johann Steinwendtner wrote:
Enable pass thru fax mode on the HT486, or enable ulaw in your SIP
config.
Hans
Garth van Sittert schrieb:
Hi All
Is there any special configuration needed to send and receive faxes
on an ATA device?
I am using G711.a with a Grandstream Handytone 486. I can send faxes
from a fax machine on the ATA, but receiving doesn't work. I get the
fax signal, but it just doesn't continue. The LAN is used purely for
VoIP traffic.
Garth
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
