Any More news on this from Kevin ?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Hulber Sent: Saturday, February 04, 2006 8:41 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] DTMF Sporadicaly Being Generated Good to know. I was able to play around and get it mostly working but I'm still not able to get DTMF working with Jitterbuffer ON for IAX although I previously could at least with some providers. I had to define my SIP extensions to use INBAND and set the Sipura devices to also use INBAND and not process INFO or AVT. I also noticed I was using dtmf= instead of dtmfmode= which may or may not be in my imagination that the latter works better (or at all). Now at least people can listen to voicemail and authenticate a remote conference call using the same device. MARK. Rob Thomas wrote: > To quote Kevin: > > DTMF handling in the trunk is in a state of flux right now. It won't > be resolved until this weekend. > > Don't use SVN for a production system, it's lots broken right now. If > you really must, stick with r8786 for a while. > > --Rob > > > >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:asterisk-users- >> [EMAIL PROTECTED] On Behalf Of Mark Hulber >> Sent: Sunday, 5 February 2006 10:21 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [Asterisk-Users] DTMF Sporadicaly Being Generated >> >> I've been having horrible DTMF problems lately on from Sipura ATAs to >> ZAP and IAX. It's primarily with repeated digits. I'm starting to >> > move > >> my connections to SIP until I can get it all figured out. Other than >> updating to the newest SVN trunk I haven't made changes on my end >> that should have caused this. >> >> I've already put some of my IAX debug on a bug report relating to >> > double > >> dtmf with Jitterbuffer enabled. >> >> MARK. >> >> Kevin P. Fleming wrote: >> >>> Michael L. Young wrote: >>> >>> >>>> I have a TE411P card in my * box. I am running FC4 x86_64. I used >>>> > to > >>>> have >>>> two TE110 cards in the same box that worked without any problems. >>>> > Since > >>>> changing to the TE411P cards, I am getting random DTMF tones being >>>> produced on a bridged connection through the same Channel Bank that >>>> I was >>>> > using > >>>> before upgrading to the TE411P. >>>> >>> This is a known problem, been discussed on the lists many times. You >>> should contact Digium Support, since you just purchased a Digium >>> > card. > >>> They are best equipped to handle issues related to Digium hardware. >>> _______________________________________________ >>> --Bandwidth and Colocation provided by Easynews.com -- >>> >>> Asterisk-Users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> Asterisk-Users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
