AnyOne? any help?
As I'm looking at your zapata.conf I recall a problem in receiving dial-outs from a non-asterisk IVR to an * server1 and server1 routs the call to server2 with IAX2 in order to make a final dial command to a ZAP channel, but in server2 cli console I get the error (UNABLE TO CREAT CHANNEL OF TYPE ZAP) , this is my zapata.conf setup:
[channels]
language=en
context=inbound
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callerid=asreceived
amaflags=billing
busydetect=yes
busycount=8
channel=>32-46,48-62,63-77,79-93,94-108,110-124
channel=>125-139,141-155,156-170,172-186,187-201,203-217
group=2
context=test
channel=>1-15,17-31
;Arpu trunk
group=3
context=arpu
signalling=pri_net
channel=>218-232,234-248
extensions.conf :
[arpu]
exten=>_N.,1,NoCDR
exten=>_N.,2,Dial(Zap/r2/${EXTEN})
exten=>_N.,3,Hangup()
;here I route the call to server2
exten=>_0XXXXXXXXX,1,NoCDR
exten=>_0XXXXXXXXX,2,Dial(IAX2/arpu:[EMAIL PROTECTED]/${EXTEN})
exten=>_0XXXXXXXXX,3,SoftHangup(${CHANNEL})
and server2 zapata.conf:
[channels]
language=en
context=inbound
switchtype=euroisdn
pridialplan=national
prilocaldialplan=national
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=no
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callerid=asreceived
amaflags=billing
busydetect=yes
busycount=8
;
channel=>1-15,17-31
channel=>32-46,48-62
channel=>63-77,79-93
;Arpu trunk
group=3
context=arpu
signalling=pri_cpe
channel=>94-108,110-124
where extensions.conf for server2 is:
[arpuvoip]
;here I place a Zap call and the console shows (Unable to create a channel of type ZAP)
exten=>_0XXXXXXXXX,1,Answer()
exten=>_0XXXXXXXXX,2,Dial(Zap/g1/${EXTEN})
exten=>_0XXXXXXXXX,3,Hangup()
Any Ideas?
Truely/
Joe
From: "Jerome SOUCANY" <[EMAIL PROTECTED]>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users@lists.digium.com>
To: <asterisk-users@lists.digium.com>
Subject: [Asterisk-Users] No sound on 10% of incoming calls
Date: Tue, 7 Feb 2006 11:03:49 +0100
>Hello,
>
>I have a problem with Asterisk, on 10% of incoming calls the IP Phone ring
>but I don't hear the caller and the caller doesn't hear me (all IP Phones
>have the same problem).
>
>This problem appear also if the call is directly send to the second E1 of
>the digium card who is connected to an IVR.
>
>It does not depand on the charge of the server (I have the problem with only
>one call).
>
>The configuration :
>
>PRI (France Telecom) 15 channels <====> Asterisk <=====> IP Phone
>
>* Server :
> - Dell power edge 1800SC
> - 2 Ethernet cards (LAN + VoIP LAN)
> - Digium card : TE 405P
> - Linux Mandriva LE 2005 (10.2) :
> Linux ASTERISK 2.6.11-12mdksmp #1 SMP i686 Intel(R) Xeon(TM) CPU
>3.00GHz unknown GNU/Linux
> - Asterisk 1.2.4
> - Zaptel 1.2.3
> - Libpri 1.2.2
>
>* IP Phone :
> SNOM 320 (latest firmware)
>
>============================================
>zaptel.conf
>
>span=1,1,0,ccs,hdb3
>span=2,1,0,ccs,hdb3,crc4,yellow
>span=3,1,0,ccs,hdb3,crc4,yellow
>span=4,1,0,ccs,hdb3,crc4,yellow
>
>bchan = 1-15, 17-31
>dchan = 16
>bchan = 32-46,48-62
>dchan = 47
>bchan = 63-77,79-93
>dchan = 78
>bchan = 94-108,110-124
>dchan = 109
>
>loadzone = fr
>defaultzone = fr
>
>============================================
>
>============================================
>zapata.conf
>
>[channels]
>switchtype=euroisdn
>pridialplan=national
>signalling=pri_cpe
>usecallerid=yes
>hidecallerid=yes
>usecallingpres=no
>callwaiting=yes
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=yes
>cancallforward=yes
>echocancel=yes
>echocancelwhenbridged=yes
>echotraining=yes
>rxgain=0.0
>txgain=-6.0
>
>group=1
>callgroup=1
>pickupgroup=1
>
>immediate=no
>callprogress=yes
>
>callerid=asreceived
>group=1
>context=from-pstn
>signalling=pri_cpe
>channel => 1-15 ;,17-31 => only 15 first channels on PRI
>
>group=2
>context=from-ivr
>signalling=pri_net
>channel => 32-46,48-62
>
>group=3
>context=from-ivr-bis
>signalling=pri_net
>channel => 63-77,79-93
>
>group=4
>signalling=pri_net
>channel => 94-108,110-124
>============================================
>
>
>
>
>Any ideas ?
>
>
>
>Regards
>
>Jerome
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
Free yourself from those irritating pop-up ads with MSN Premium. Join now and get the first two months FREE*
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users