Been covered Ad Nauseum on the list.
Asterisk does NOT detect dialtone
w, or a series of w's befor dialing begins will help, EXCEPT when doing
pulse dialing.
w does NOT work with pulse dialing
No one seems to think this is a problem, so it doesn't get addressed.
John Novack
Joseph Tanner wrote:
I "think" you can add "w" (without the quotes) to your dialplan to
wait. Perhaps putting a few in front of the number, or even one in
between each number? Not sure, haven't had to use this feature,
sorry.
Perhaps your provider doesn't like the duration of the dtmf tones
themselves. For that I think you'd have to go into the zaptel source.
Joseph Tanner
On 2/7/06, Eldon Neustaeter <[EMAIL PROTECTED]> wrote:
Config:
AAH 2.2
Digium TDM card connecting to 3 x Telus POTS lines
Polycom 501 phones
pretty basic setup, working mostly just fine...
When I dial a number such as:
96045551212
Telus automation will sometimes come online and tell me that the number I
have dialled cannot be completed as dialled.
If I hang up the Polycom 501 and redial the EXACT same number, it will work
the second time.
I think that AAH or Asterisk is passing touch tones to the POTS line too
fast possibly. The dialplan simply has "9|." to strip out the 9's.
Any suggestions?
-- Eldon Neustaeter
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
