Gary-
You have a Cisco 2600 acting as both a SIP gateway to the
Asterisk box -and- as an H.323 gateway for your CCM?
Can you provide me with config details?
12.3(8)T3,c2600-ipvoice-mz.123-8.T3
with T1 (2 Port) Multi-Flex Trunk
I tried to set up h.323 to the Asterisk box-- didn't know
there was a possibility of running SIP and H.323 at the same
time...
thanks, Tim
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gary Richardson
Sent: Tuesday, February 07, 2006 9:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Cisco 2620 as PRI gateway
Looking through my config I notice:
sip-ua
sip-server ipv4:<asterisk server ip address>
Everything else in the config file is for our h323 call manager gear. I can't remember if I needed to add the above line to make a sip server run on the router. In order to place a call to the PSTN, I Dial(SIP/9XXXXXXXXXX@<ip address of my 2811>) and everything works.
As for how much of this applies to a 2600.. you'll have to see.
On 2/6/06, Schochet,
Wes <[EMAIL PROTECTED]
> wrote:
I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make
this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like
it should bee useful for something!
I'm perfectly happy to do my homework, but also don't feel thee need to
reinvent the wheel! So, links with relevant info would be appreciated. If
there is a config for a 2621 being used as a gateway out there somewhere, I
wouldn't be too proud to take a look at that either! Asterisk configs would
be great too!
Thanks,
Wes
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
