To All, I recently purchased a Sipura 3000 for home use. Generally it seems to work fine, but it also majorly screws up on a frequent, almost daily, basis.
Terrible echo problems that come and go, and sometimes it just seems to "lose its way" and can't re-register. For example, I'll be talking to an incoming caller and an echo starts quietly in the background. Within a minute or so, I'll lose the connection, with my voice 100% reflecting back at me, and the caller says the same occurs at their end, his/her voice 100% reflecting back to him/her. I usually have to reset the device completely at that point. Other times, I'll get a call and talk for 1/2 hour with no problems whatsoever. I have it set up with [EMAIL PROTECTED] V 2.2 according to the setup at http://mundy.org/blog/index.php?p=65 altough I am not using the caller ID portion of his setup. Also I get the following strange error: chan_sip.c: That's odd... Got a response on a call we dont know about. Cseq 102 Cmd SIP/2.0 I can't seem to pin it down. I've checked the source (chan_sip.c) and because I'm not well aquainted with the protocol, I'm about as clueless as could be as to what its telling me. Unfortunately its a headless box, and so by the time I can log in through PuTty/whatever and fire up asterisk -r, the call is long gone. On the other hand, with my not so bountiful skills, I'm not sure how much good a sip debug would help me anyway. Any help or advice on either issue (could they be related?) would be greatly appreciated. Regards, John C. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
