You are not going crazy you are fine. Look at bug: http://bugs.digium.com/view.php?id=1192
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Mark Farver > Sent: Wednesday, February 08, 2006 12:17 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] PRI to PRI not passing callerid > > Andres wrote: > > > You can enable debug on the PBX spans and see if the caller id is > > being sent in the SETUP message. > > > Ok.. debug output below.. I did a little more digging and the > problem is the system is not passing calling name, only > calling number. > > (The x's below are my doing, the correct number did appear. I > don't think asterisk prints the name information in the > accepting call line.) > > Mark > > -- Accepting call from '512xxxxxxx' to '6429' on channel > 0/1, span 4 Feb 8 12:10:46 DEBUG[180236]: chan_zap.c:1224 > zt_enable_ec: No echocancellation requested > -- Executing Macro("Zap/73-1", "dial-pbx1|6429") in new stack > -- Executing Dial("Zap/73-1", "Zap/r3/6429") in new stack > -- Making new call for cr 32776 > > Protocol Discriminator: Q.931 (8) len=40 > Call Ref: > len= 2 (reference 8/0x8) (Originator) Feb 8 12:10:46 > DEBUG[180236]: chan_zap.c:1224 zt_enable_ec: No > echocancellation requested > Message type: SETUP (5) > [04 > 03 80 90 a2] > Bearer Capability (len= 5) [ Ext: 1 Q.931 > Std: 0 Info transfer > capability: Speech (0) > > Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > > Ext: 1 User information > layer 1: u-Law (34) > > [18 03 a1 83 87] > > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: > 0, Preferred Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified > Channel > Type: 3 > > Ext: 1 Channel: 7 ] > > [1e 02 80 83] > > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > (0) 0: 0 Location: User (0) > > Ext: 1 Progress > Description: Calling > equipment is non-ISDN. (3) ] > > [6c 0c 21 81 35 31 32 33 34 35 35 34 37 36] > Calling > Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > Presentation: Presentation > permitted, user > number passed network screening (1) '5123455476' ] > [70 05 > a1 36 34 32 39] > Called Number (len= 7) [ Ext: 1 TON: > National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '6429' ] > -- Called r3/6429 > < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= > 2 (reference 32776/0x8008) (Terminator) < Message type: CALL > PROCEEDING (2) < [18 03 a9 83 87] < Channel ID (len= 5) [ > Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified > Channel > Type: 3 > < Ext: 1 Channel: 7 ] > -- Processing IE 24 (cs0, Channel Identification) < Protocol > Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference > 32776/0x8008) (Terminator) < Message type: ALERTING (1) Feb > 8 12:10:46 DEBUG[163851]: chan_zap.c:1224 zt_enable_ec: No > echocancellation requested > -- Zap/55-1 is ringing > -- Channel 0/1, span 4 got hangup > Feb 8 12:10:49 DEBUG[524303]: chan_zap.c:2468 zt_setoption: > Set option AUDIO MODE, value: ON(1) on Zap/55-1 Feb 8 > 12:10:49 DEBUG[524303]: chan_zap.c:1978 zt_hangup: Hangup: > channel: 55 index = 0, normal = 37, callwait = -1, thirdcall > = -1 Feb 8 12:10:49 DEBUG[524303]: chan_zap.c:2114 > zt_hangup: Not yet hungup... Calling hangup once with > icause, and clearing call NEW_HANGUP DEBUG: Calling > q931_hangup, ourstate Call Delivered, peerstate Call Received > > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= > 2 (reference 8/0x8) (Originator) > Message type: DISCONNECT > (69) > [08 02 81 90] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Normal Clearing (16), > class = Normal > Event (1) ] > Feb 8 12:10:49 DEBUG[524303]: chan_zap.c:2380 zt_setoption: > Set option TDD MODE, value: OFF(0) on Zap/55-1 Feb 8 > 12:10:49 DEBUG[524303]: chan_zap.c:1196 update_conf: Updated > conferencing on 55, with 0 conference users Feb 8 12:10:49 > DEBUG[524303]: chan_zap.c:2462 zt_setoption: Set option AUDIO > MODE, value: OFF(0) on Zap/55-1 > -- Hungup 'Zap/55-1' > Feb 8 12:10:49 DEBUG[524303]: app_dial.c:1028 dial_exec: > Exiting with DIALSTATUS=CANCEL. > == Spawn extension (macro-dial-pbx1, s, 1) exited non-zero > on 'Zap/73-1' in macro 'dial-pbx1' > == Spawn extension (external, 6429, 1) exited non-zero on 'Zap/73-1' > Feb 8 12:10:49 DEBUG[524303]: chan_zap.c:2468 zt_setoption: > Set option AUDIO MODE, value: ON(1) on Zap/73-1 Feb 8 > 12:10:49 DEBUG[524303]: chan_zap.c:1978 zt_hangup: Hangup: > channel: 73 index = 0, normal = 54, callwait = -1, thirdcall > = -1 Feb 8 12:10:49 DEBUG[524303]: chan_zap.c:2114 > zt_hangup: Not yet hungup... Calling hangup once with > icause, and clearing call Feb 8 12:10:49 DEBUG[524303]: > chan_zap.c:2380 zt_setoption: Set option TDD MODE, value: > OFF(0) on Zap/73-1 Feb 8 12:10:49 DEBUG[524303]: > chan_zap.c:1196 update_conf: Updated conferencing on 73, with > 0 conference users Feb 8 12:10:49 DEBUG[524303]: > chan_zap.c:2462 zt_setoption: Set option AUDIO MODE, value: > OFF(0) on Zap/73-1 > -- Hungup 'Zap/73-1' > < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 > (reference 32776/0x8008) (Terminator) < Message type: RELEASE > (77) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Release Request > Protocol Discriminator: Q.931 > (8) len=9 > Call Ref: len= 2 (reference 8/0x8) (Originator) > > Message type: RELEASE COMPLETE (90) > [08 02 81 90] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Normal Clearing (16), > class = Normal > Event (1) ] > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Null NEW_HANGUP DEBUG: Destroying the call, > ourstate Null, peerstate Null > > > >> > >> > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
