On Feb 8, 2006, at 1:03 PM, Gerard Saraber wrote:
Hi, I've had some decent luck with the mark3 echo canceller from the zaptel driver, echos on about 20% of the calls, people I've called say I sound great now, but our side hears echos. I was wondering if there was any way to tweak the current software cancelers into using more CPU (and hopefully doing a better job, close to a hardware canceler), I only have 10 lines, and a single call takes 0.5% cpu, I would have no problem if it went up to 5-10% if they would work better. Or should I just give up now and buy the channel bank, tellabs hardware echo canceler and a T1 pci card? (hope TDM400P cards have decent resale value ;)
Yeah there is, upgrade to trunk and use the new echo canceller there (MG2). It's supposed to rock, at least from what I've heard. All the MEC cancellers are _OLD_. At least switch to 1.2 and the KB1 echo canceler before giving up.
--- Matthew Fredrickson _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
