On Wed, 2006-02-01 at 10:07 -0200, Juan Carlos Castro y Castro wrote: > > Juan Carlos Castro y Castro wrote:
> > > > I would not recommend running that much load in a single server of FXS, > > because the power supply requirements are too great, but if at least > > half is FXO then you should be fine. Four TDM2400Ps is the same amount > > of Zaptel load as a single quad-port T1 card, so most servers should be > > able to handle it. > > Sweet! So -- what are the specs of that server you tested on? Specifically, > the power supply wattage? My intended use here is all FXS, so I suppose a > limit of 2 would be reasonable. > > By the way -- don't you think it would be nice if some FXS hardware had some > way to drain power from somewhere else that the PC's power supply? Forgive > me if this idea has already been discussed to death there. > Just wondering, Considering costs & power demands, might it not be advisable to have a look at one or two channelbanks and a single/dual line T1-board? If you need a second or even third machine to host the tdm2400 boards, it might get expensive and get your config unneeded compicated... Hans -- pgp-id: 926EBB12 pgp-fingerprint: BE97 1CBF FAC4 236C 4A73 F76E EDFC D032 926E BB12 Registered linux user: 75761 (http://counter.li.org) _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
