Darlon wrote:
Try to change the value of protocolvariant in the unicall.conf.
Please, send us here the result.
The answer to R2 problems is not stumbling in the dark, randomly trying
variants. If you are in country X, the required variant is unlikely to
be anything but X. If you are expecting 7 digits, the required number of
expected digits is unlikely to be anything other than 7, etc.
Regards,
Steve
*Darlon Ferreira Bortolini*
Rede/Desenvolvimento
Betha Sistemas
Fone (48) 3431-0750/Ramal 1000
----- Original Message -----
*From:* Carlos Chavez <mailto:[EMAIL PROTECTED]>
*To:* Asterisk <mailto:[email protected]>
*Sent:* Friday, February 10, 2006 1:57 AM
*Subject:* [Asterisk-Users] Problem win Unicall
I am having a strange problem with an asterisk servier using
R2 Unicall
in Mexico. Most calls go through fine but some of them give me an
error like
this:
If only a few calls do this, there may be something special happening on
the line for those calls. Perhaps an unexpected category code. R2 varies
quite a bit.
The log you provided doesn't say much that is useful, as the logging
level is too low. In unicall.conf put the line "loglevel=255" somewhere
before the channels are defined. Then run the system, and send me the
complete log of a problem call. From that, I should be able to tell you
what is going wrong.
Regards,
Steve
-- Executing Dial("SIP/86-db41", "Unicall/g2/014448343600") in
new stack
-- Called g2/014448343600
Feb 9 21:44:39 WARNING[23069]: chan_unicall.c:2644
handle_uc_event: Unicall/2
event Dialing
Feb 9 21:44:45 WARNING[23069]: chan_unicall.c:2644
handle_uc_event: Unicall/2
event Protocol failure
-- Unicall/2 protocol error. Cause 32769
Feb 9 21:44:45 WARNING[23069]: app_dial.c:705 wait_for_answer:
Unable to
forward voice
Feb 9 21:44:45 WARNING[23069]: app_dial.c:705 wait_for_answer:
Unable to
forward voice
-- Hungup 'UniCall/2-1'
== Everyone is busy/congested at this time (1:0/0/1)
This particular call is national long distance. But I have
seen the
problem with some local numbers. I even had a problem dialing a
company in
the same city, their main numbers gave this error but their fax
number went
through without problem.
I am using Asterisk 1.2.4 (upgraded from 1.2.3 this morning),
spandsp
.21, unicall 0.0.3. Any ideas? I am using a TE110P card with
Zaptel 1.2.3
with 10 channels from Telmex.
--
Carlos Chavez
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
