Re: [Asterisk-Users] TE411P Really Bad Echo

[Stagg Shelton]

I am using asterisk 1.2.4 and zaptel 1.2.3.  Also, I tried the latest zaptel out of subversion. Stagg Shelton www.oneringnetworks.com Isaac Xiao (KVB Kunlun Pty Limited) wrote: What version of Asterisk and Zaptel you were using? Did you try latest Asterisk 1.2.4 and Zaptel 1.2.3? Anyone has good feedback for TE411P?   Isaac Xiao   Stagg Shelton wrote:   > It was Digium's opinion that perhaps the card had a VPM.  We got a > replacement TE411P, I implemented it tonight and still the exact same > echo problem.  At this point I feel like I can rule out failed hardware. >  > I contacted Digium support and now they are telling me it's something > with my carrier, and I should call them.  I called Bellsouth, and they > ran a full stress test on the circuit taking me offline for about 30 > minutes. >  > The end result is that the circuit test passed with no errors.  > Bellsouth says it's not in their network, Digium says its not their > card, and I have a te411p with VPM disabled in the wct4xx kernel > module because something doesn't work the way it should.  My customer > is wanting to know about sangoma cards with the echo cancellation, and > at this point I'm nervous to recommend any hardware.  I'm going to > look into the sangoma that you suggested.  Are there any other kinds > of products that I could look into either Passive or Active. >  > Thanks >  > Stagg Shelton > www.oneringnetworks.com >    _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users