Andres, Thanks for the explanation!
-----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Andres Enviado el: miércoles, 15 de febrero de 2006 1:31 Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: Re: [Asterisk-Users] Telmex PRI line configuration problem >no cdp enable >----------------------------------------------------- > >1) Is it possible to have CAS framing with no R2? > > You cannot have CAS and PRI at the same time. Thats for sure. Also CAS goes hand-in-hand with R2. CAS means Channel Associated Signalling and MFC-R2 is the Signalling type used in each of those channels. >Could be my zaptel.conf look like this? > >; no "cas=" defined here cause the driver assigns that to MFCR2 >span 1,1,0,cas,hdb3,crc4,yellow >bchan=1-15 >bchan=17-31 >dchan=16 > >Some help needed >Thanks in advance > >Oscar Andrés Carriles > > > > > -- Andres Technical Support http://www.telesip.net _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
