Hello,
I have about 10 Asterisk PBX in production with Bristuff-0.2.0-RC8q
(asterisk 1.0.10) and I want to use Bristuff-0.3 now for the new PBX
I am going to set up.
With Bristuff-0.2.0-RC8q the ISDN lines are working fine, but the new
version of Asterisk add some nice features.
All these PBX are in France with France Telecom lines.
When I use the new version after about an hour with Euronumeris lines
and almost instantly with Euronuméris+ line, TE lines goes
Deactivated in /proc/zaptel/:
Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED
(F7)" AMI/CCS
1 ZTHFC1/0/1 Clear (In use)
2 ZTHFC1/0/2 Clear (In use)
3 ZTHFC1/0/3 HDLCFCS (In use)
I have tested almost all the possible settings for /etc/zaptel.conf
and /etc/asterisk/zapata.conf
There is no IRQ sharing for the HFC-PCI cards.
When cards are deactivated, I can receive calls, but not make call.
The cards in NT mode seems to work fine (connected to an Alcatel PBX).
All the cards are 1 port HFC-PCI cards. I also have an 8 ports card
from Junghanns.net but this card is on a production server and it's
hard to use it for test.
Almost all the PBX are on Centos 3.4 with kernel 2.4.21.
Does someone have this problem to?
I can post the configuration files if it can help.
Best regards
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
